Tubless Mountain Bike Wheels

| Tuesday, February 8th, 2011 | No Comments »


Tubeless mountain bike wheels improve traction and control in adverse weather and rugged terrain whilst eliminating pinched flats and problems associated with standard tub tyres. UST (Universal Standard for Tubeless) cycle wheels were developed in a joint industry effort between Mavic, Michelin and several other manufactures with an emphasis on mountain bike applications. Today, a number of mainstream bicycle and tyre manufacturers, including Kendra, Shimano and Bontrager, offer a range of tubeless mountain bike wheels and specialty tyres.

Tubeless mountain bike wheels are built with an airtight tyre channel and a rim-mount valve rather an inner tube valve. Tyre carcasses are mounted directly onto the wheel using a self-healing sealant inside and a latex or silicone bead along the tyre edge. A tight seal is achieved by adding pressure with a high-powered air compressor or CO2 cartridge. Although tubeless mountain bike wheels are designed for use with tubeless tyres that contain an integrated liner, some riders pair their tubeless wheels with standard tub tyre carcasses for maximum weight reduction.

After the initial tyre installation, tubeless wheels have a number of benefits for the off-road mountain biker and trail rider. With tubeless wheels, you’ll never have another pinched flat from your rim cutting the inner tube. Tubeless riders can comfortably lower their air pressure by 10 psi or more for a softer ride on rugged terrain. Self-healing sealants are messy, but they provide some great benefits after punctures. Sealant often spews dramatically from tubeless tyres as air is forced through puncture wounds. In most cases, the sealant will form a plug in the hole allowing you to continue your ride or at least arrive safely back at your home base without damaging your rims or calling a taxi.

For most riders, tubeless mountain bike wheels are an after-market upgrade although some high-end manufacturers offer tubeless wheel with new purchases. Typical start-up costs range from £134 per wheel to £1.000 or more for carbon fibre wheels featuring ceramic bearings and a deluxe hub. Mid-range tubeless wheel sets for mountain bikes can be purchased for roughly £400-500, including hubs. Tubeless tyres are more expensive than standard tyres ranging anywhere from £30 to £100 per tyre. However there’s no need to purchase secondary inner tubes. Tubeless mountain bike wheels are ideal for riders seeking a safe tyre and wheel solution with traction and performance-enhancing capabilities in the harshest terrain.

FSA XC-500 Tubeless Wheels  

FSA XC-500 Tubeless Wheels

FSA XC-500 Tubeless Wheels. Wheels Factory MTB. Tubeless wheelset with clincher rim. •Disc specific rims made from 6061/T6 •Superlight direct pull hubset •Sealed cartridge bearing •DB-14 stainless spokes •Brass spoke nipples

  £389.99
More Information
DT Swiss Tubeless Kit XR 4.1/4.1d/4.1c  

DT Swiss Tubeless Kit XR 4.1/4.1d/4.1c

DT Swiss Tubeless Kit XR 4.1/4.1d/4.1c. Wheels Tubeless Kits. Turn your DT Swiss rims into a UST (tubeless compatible) setup with this kit. Kit includes: double sided tape, molded rim strip, tubeless valve, and starter bottle of sealant. With this ki

  £32.99
More Information
Hutchinson MTB Tubeless Conversion Kit.  

Hutchinson MTB Tubeless Conversion Kit.

Hutchinson MTB Tubeless Conversion Kit.. Wheels Tubeless Kits. Mountain bike tubeless conversion kit. •Rim Width: 17-24mm •Content: 2 tubeless rim strips, 2 removable tubeless valves, 1 Protect’Air Max 120ml (sealant liquid), mounting

  £46.99
More Information
No Flats Joe's A.M. Tubeless Conversion Kit  

No Flats Joe's A.M. Tubeless Conversion Kit

No Flats Joe's A.M. Tubeless Conversion Kit. Wheels Tubeless Kits. Fits All Mountain rims 19-25 mm inner rim width. Joe's Tubeless System is the most important upgrade available for a dedicated cyclist. Weight 60 grams per strip including val

  £26.99
More Information
No Flats Joe's XC Tubeless Conversion Kit  

No Flats Joe's XC Tubeless Conversion Kit

No Flats Joe's XC Tubeless Conversion Kit. Wheels Tubeless Kits. Fits all XC rims, 17-19 mm inner rim width. Colour coded Blue. Joe's Tubeless System is the most important upgrade available for a dedicated cyclist. Weight 45 grams per strip i

  £26.99
More Information
Campagnolo 2 Way Fit Tubeless Valve  

Campagnolo 2 Way Fit Tubeless Valve

Campagnolo 2 Way Fit Tubeless Valve: Replacement tubeless valve for use with Campagnolo 2 Way Fit compatible rims.

  £9.99
More Information
NoTubes Cyclocross Tubeless Kit  

NoTubes Cyclocross Tubeless Kit

NoTubes Cyclocross Tubeless Kit. Wheels Tubeless Kits. This kit will fit most cyclocross rims 17 to 21mm wide. What does this kit include? •Pint of Sealant •2 cyclocross strips •Universal Kit Tape •Scoop & Spout for sealant &b

  £40.00
More Information
NoTubes Freeride Tubeless Kit  

NoTubes Freeride Tubeless Kit

NoTubes Freeride Tubeless Kit. Wheels Tubeless Kits. This Kit will fit most 26inch and 24inch 27mm to 34mm wide rims. Including: 650b Velocity Blunt, Rhyno Lite XL, Single wide, Single Track, Salsa Gordo, Alex DM24, and Supra D. What’s Included

  £43.99
More Information
NoTubes Ryhno Tubeless Kit  

NoTubes Ryhno Tubeless Kit

NoTubes Ryhno Tubeless Kit. Wheels Tubeless Kits. This kit will fit Sun Rhyno Lite, Mavic 521, 721, 321(old 219). Note: Rim strips feature Presta valve stems. What does this kit include? •Pint of Sealant •2 Rhyno Lite Rim Strip •Univer

  £53.99
More Information
NoTubes 29er Tubeless Kit  

NoTubes 29er Tubeless Kit

NoTubes 29er Tubeless Kit. Wheels Tubeless Kits. 29-inch Mountain Bike Rims – This Rim Strips is for 29-inch mountain bike rims. Will fit Bontrager V brake, Salsa Delgado-X and Mavic 520 Touring 29-inch mountain bike rims. This kit includes: •On

  £53.99
More Information

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Leave a Reply